How to Fix Arris Router WiFi Not Working?
Generally, stable and dependable WiFi is crucial for our daily activities in the fast-paced world of technology. However, Arris routers are not exempt from problems, just like any other technological gear. Additionally, users sometimes face issues with it, such as Arris router WiFi not working. Likewise, this issue may occur for several reasons that we disclose further.
In addition, Arris routers are well known for their fastest speed, and the high network coverage area. Similarly, this networking device is suitable for your commercial place as well as your living spot. This router cum modem comes with a 1GbPS port and 1Gbps internet speed. With so many advantages and ultrafast speed, the Arris modem router wifi not working error may occur.
However, if any of you face the Arris wireless router wifi not working issue, then must read our post. In this post, we will explore the reasons first why it is not working and how to fix this issue.
Why is Arris Modem Router WiFi Not Working?
It is essential to know the root causes behind the Arris router not broadcasting WiFi issue before you delve deep to find the right solution. Here is the list of possible consequences:
- Improper router configuration
- Outdated firmware
- Internet obstructions
- Unstable network connection
- Faulty network cables or adaptor
- Internal glitches
- Overloaded network
- Enabled VPN
Troubleshooting Steps for Arris WiFi Router Not Working
Moreover, it is essential to resolve the not connecting to WiFi issue with your Arris router. However, it is a very common yet temporary problem that you can resolve by following the methods we explain in this section. Similarly, these steps will help you to get rid of this issue and enhance the normal functioning of your router. Now, it’s time to begin with the fix-outs:
Eliminate the Signal Interference
1. Identify the potential sources of network interference, such as cordless phones, microwave ovens, etc.
2. These objects cause network disruptions and your router can’t perform well.
3. You can also relocate your router away from these hindrances.
Update Router Firmware
1. Check the Firmware update for your Arris router.
2. To check and update the Firmware, you have to access the admin panel of the router.
3. Further, follow the instructions to install the latest firmware.
Verify the Configuration Settings
1. Verify that the network settings, including SSID, security mode, and passwords, are configured correctly.
2. Also, look at the network that you have selected, if it is 5GHz, change it to 2.4GHz.
3. Ensure the router is set to the correct WiFi channel with minimal interference.
Manage Network Load
1. Sometimes Arris router keeps dropping WiFi if the network is overloaded with unused devices.
2. Therefore, limit the number of essential connected devices using Quality of Service (QoS) settings.
Check the Network Cables
1. Look at the networking cable you used are not damaged.
2. If there is any loose connection, then tighten it.
3. If a damaged cable or adaptor is present, then replace it.
Restart Your Router
1. Rebooting your Arris router will fix the internal glitches and bugs on your router.
2. Therefore, turn off the devices one by one and wait for 30 seconds.
3. After that, plug them back in as you removed them prior.
Uninstall the VPN
1. Sometimes Arris router WiFi not working error may occur due to the enabled VPN.
2. So, disable or uninstall it till you complete the process of connecting with your router.
3. Afterwards, you can reinstall the VPN.
Ensure Sufficient Power Supply on the Router
1. Generally, the router needs an adequate power supply to connect to the network.
2. If the power supply is insufficient, network issues are common.
3. So, plug the router adaptor into a secure power socket that is not damaged or burnt.
Factory Reset Your Router
1. When nothing works for you, then go ahead for a factory reset.
2. Hence, look for the reset button on your router.
3. Then, press and hold this button for a few seconds.
4. When the LED blinks then release the reset button.
5. After that, wait till the router reboots itself, now reconfigure it from scratch.
How to Know the Signal Strength on My Arris Router?
Additionally, to check the signal strength on your Arris router, you need to access the web interface of the router. You can access it by using the web address or the IP address. After accessing the web interface, look for the downstream and upstream power levels and the signal-to-noise ratio (SNR). Further, the downstream power level should be between -10 dBmV and +10 dBmV, while the upstream power level should be between 35 dBmV and 50 dBmV, and your SNR should be above 30 dB.
The Bottom Line
All in all, the brief information we share with you will resolve the Arris router WiFi not working issue. However, before going ahead to pick the solutions, one must understand the root causes responsible for this error. After that, you can use the given methods in the troubleshooting section to fix this problem. Likewise, you can also walk through another section to find out the correct signal strength of your router. If looking for more information, get in touch with us!